Polishing of Zirconia Crowns: Techniques and Practice (In-depth Discussion)

Apr 09, 2024 Laat een bericht achter

Polishing of Zirconia Crowns: Techniques and Practice (In-depth Discussion)

 

 

1. Special challenges of zirconia crowns

Although the mechanical strength of zirconia materials is very high, it has a certain brittleness. Especially during the polishing process, if it is not handled carefully, it is easy to cause microcracks to form, which in turn affects the long-term durability of the crown. Therefore, polishing of zirconia crowns is not just a simple surface treatment process, it involves a comprehensive understanding and fine control of the physical properties of the material.

 

1. Control of the heat-affected zone during polishing

 

Management of heat-affected zone: When using polishing tools, maintain appropriate low speed and slight pressure to avoid overheating of the tools, especially when using diamond abrasives. In addition, the use of water cooling is essential because it can effectively take away the heat generated during polishing and prevent the overheating of zirconia from causing changes in crystal structure or surface defects.


2. Reduce microcracks during polishing
The polishing process of zirconia crowns may produce tiny cracks on the surface, especially when coarse abrasives are used in the early stage. In order to effectively avoid this problem, use fine-grained abrasives for gradual polishing and use fine polishing brushes for final surface treatment.

 


2. Factors affecting the polishing effect of zirconia crowns


 

1. Characteristics of zirconia materials

Transparency: The transparency of zirconia is one of the key factors affecting the aesthetic effect. Although traditional zirconia materials are relatively opaque, with the development of technology, there are a variety of zirconia materials with higher transparency, such as high transparency (HTZ) and ultra-transparency (UTZ) zirconia, which can better simulate the luster of natural teeth.

 

The influence of transparency: The transparency of zirconia is closely related to its molecular structure. During the polishing process, the appropriate polishing method should be selected according to the transparency requirements of zirconia. High-transparency zirconia requires particularly fine polishing to ensure its good optical effect.


2. The influence of different thicknesses on polishing effect

Thickness difference: On thinner zirconia crowns (such as {{0}}.4mm and 0.6mm), special care needs to be taken when polishing to avoid excessive wear. Thicker zirconia crowns can tolerate slightly rougher polishing, but not excessive polishing, as this will affect the optical effect of the crown.


3. Choice of surface treatment technology


 

Plasma treatment: This technology improves the surface properties of zirconia materials, removes impurities and enhances gloss through the action of low-temperature plasma.

 

4. Polishing skills in practice


1. Reasonable abrasive selection

 

 

2. The importance of water cooling

 

3. Surface inspection after polishing

 

4. Common problems in polishing zirconia crowns

Over-polishing: If over-polishing, the strength of the zirconia crown may be reduced, or even the surface may become thinner.

 

5. Summary

 

 

, pre-colored dental zirconia block seriesmulti-layer dental zirconia block series. Our products are very affordable and have passed FDA and CE certification. We are now exporting to more than 120 countries and regions around the world, providing dental zirconium blocks to more than 2,000 dental laboratories. Your inquiries are welcome!

Aanvraag sturen

whatsapp

Telefoon

E-mail

Onderzoek